scroll and find out more...
Leek technology - Mounted harvester | PO-335A
Single row, mounted
The PO-335A is a mounted, single-row top lifter for automatic filling of crates. It is the perfect solution to start a mechanical and effective harvest of leek. Thus, the machine is mainly used on medium-sized and large farms, that want to save on labour costs. The machine is characterised by its high variability in equipment and hight efficiency. The machine is carried in the lower guides of the tractor and an interaxle attachment frame. A share loosens the soil below the root. The rotating torpedoes are used to straighten and to lift up the haulm/tops and two cutting discs shorten the tops, which are too long. The cut leaves are ejected to the side. A root-shaker positioned directly on the coulter loosens the adhering soil, a second root-shaker removes more soil. The leek is then conveyed to the cross conveyor via the pick-up belt. A short root conveyor is fitted as standard at the transition from the pick-up belt to the cross conveyor to enable the leek to be optimally positioned on the latter. The combination of a telescopic box filling conveyor and tilting of the crate means that harvesting is particularly gentle on the crop and completely mechanised.
Benefits
- High crop protection due to the harvesting system with a top lifter.
- The compact design of the carried machine provides a high manoeuvrability.
- Low tractor requirements allow the machine to be used in combination with small, simply equipped tractors.
- Root-shakers, which are fitted as standard, enable good cleaning of the roots.
- Wide range of equipment to adapt the machine to the specific operating conditions.
- Root conveyor as standard. For an improved positioning of the leeks on the cross conveyor.
- Optionally available hydraulic wheel drive, for harvesting in wet conditions.
- High cost savings thanks to automated crate filling.
- Labour savings through mechanical harvesting.
Specifications
You'll find all the information about the standard features of the machine here.
Configuration
- Hydraulically driven torpedoes - two different versions
- Speed adjustment of torpedoes and cutting discs, manually via flow control valve
- Hydraulically driven cutting disc
- Toplifting unit with a pick-up belt length of 335"
- Pick-up belt soft type
- Speed adjustment of top lifter belt manually via flow control valve
- Fix mechanical attachment of the top lifter belt to the main frame
- Two root-shakers fitted as standard
- Speed adjustment of root-shakers manual via flow control valve
- Hydraulically driven root conveyor
- Speed adjustment of root conveyor, manually via flow control valve
- Telescopable box filler conveyor, width 630 mm, with conveyor made of plastic material
- Speed adjustment of box filling conveyor, manually via flow control valve
- Box platform PLUS - incl. hydraulic lowering for a single box with lowerable bunker floor
- Speed adjustment of picking table/picking web manually via flow control valve
- Wheels 400/60x15.5
- Operator unit "i2": "ASA-BUS" Touch-screen terminal incl. control box